Thank you for your business.

All products are guaranteed to be free of manufacturers defects for a period of one year from the date of purchase. All Laptop Docking Stations are guaranteed not to crack or break for a period of one year from the date of purchase.

Interactive Products Corporation will repair or replace, at our discretion, without charge, any of our products which fail to perform due to defects in material or workmanship. Defects which result from damage or misuse, such as excessive force or improper installation, are not covered by this warranty.

Interactive Products will not be responsible for any incidental and/or consequential damage due to failure of any Interactive Products Corporation product.

Important: This Warranty gives you specific legal rights. You may have other rights which vary form state to state.

All sales are final unless approval is first obtained for merchandise return (1-888-552-7867). All items returned are subject to a restocking fee and handling charge. You must include a copy of your invoice for credit on all returned merchandise. Product returned due to customer error must be returned within 30 days of the date of purchase, and in resaleable condition. A restocking charge of 20% of the purchase price will be assessed, and original shipping cost will also be deducted.

Package the merchandise in the original shipping container, if possible, and include a note detailing the reason for return along with your receipt of purchase (photo copies will be accepted). Please include your name, address and phone number

IMPORTANT: To achieve the best results, it is recommended that you complete the following instructions in sequential order. (See graphic at the end of this page.)

1. ATTACHING THE BASE MOUNT TO THE MOUNTING SURFACE

   Note: Some base mounts require drilling into the mounting surface for attachment, while other base mounts utilize other methods for attachment like clamping, etc.

   1. Determine if the base mount requires drilling
   2. Position the base mount to the mounting surface
   3. If the base mount requires drilling:
      
      
      • Choose the proper mounting screws (not included)
      • Mark mounting surface where screws should be placed
      • Secure base mount to mounting surface with screws
        
        
   4. If the base mount utilizes another attachment method, secure base mount accordingly
      
      
2. ATTACHING THE DEVICE MOUNT TO THE DEVICE

   Note: Some device mounts require screws to attach the device to the device mount, while other devices attach to the device mounts with other methods like clamping, etc.

   1. Determine if the device mount requires screws to attach the device
   2. If the device mount requires screws:
      
      
      • Choose the proper screws (not included)
      • Secure device to device mount with screws
        
        
   3. If the device attaches to the device mount by another method, secure the device accordingly
      
      
3. ASSEMBLING THE MOUNTING SYSTEM
   
   
   1. Open the cam lever all the way (down position) on the connector so that the end sockets are fully expanded to accept the device mount and base mount
   2. Insert the rubber ball found on the base mount into the bottom socket (the end with the VersaTrue™ logo)
   3. Insert the rubber ball found on the device mount into the top socket

      Note: Inserting the rubber balls may require slight additional force to fit into the socket. This is normal and was designed to prevent the rubber balls from falling out when connector is in the 'open' position.

   4. Close the cam lever all the way (up position) to secure the base mount and device mount in the connector

      Note: The cam lever has been factory-set to apply ideal pressure to the rubber balls. If you find the cam lever is too difficult to close, see #6 on how to make adjustments

4. ADJUSTING THE MOUNTING SYSTEM TO THE DESIRED POSITION
   
   
   1. Open the cam lever half way (90º) to the first stop (you will feel a 'bump' indicating the stop point
   2. Grab hold of the connector and tilt the entire system into the desired position
   3. While still holding the connector with one hand (for resistance), move the device mount with the other hand to tilt the device into the desired position
   4. Once the optimal position has been achieved, close the cam lever all the way (up position)
   
   
   
5. USING THE TAMPER-PROOF SECURITY SCREW
   
   
   1. Insert the Pin-In-Hex security screw (included) into the slot on the cam lever
   2. Tighten screw with 1/8" Pin-In-Hex allen wrench or bit (not included, but available as a kit from VersaTrue™)
   3. To adjust mounting system, remove Pin-In-Hex security screw, then follow steps in section 4
      
      
6. ADJUSTING THE PRESSURE APPLIED BY THE CAM LEVER

   Note: Follow these instructions if the cam lever is too difficult / easy to close or if you need the mounting system to be tightened or loosened

   TO TIGHTEN THE GRIP ON THE RUBBER BALLS:

   1. Open the cam lever all the way (down position) on the connector
   2. Turn the cam lever one rotation clockwise
   3. Close the cam lever all the way (up position)
   4. If results are still not to your liking, repeat steps 1-3 above
      
      

   TO LOOSEN THE GRIP ON THE RUBBER BALLS:

   1. Open the cam lever all the way (down position) on the connector
   2. Turn the cam lever one rotation counter-clockwise
   3. Close the cam lever all the way (up position)
   4. If results are still not to your liking, repeat steps 1-3 above